Everything That You Should Know About Timber Floors

Written by  //  2019/01/10  //  Improving the Home  //  No comments

timber floors

If you want to add elegance to your home, you should think about installing timber floors. A timber floor is a wooden floor of broad and long solid wood elements, often of room lengths. In contrast to the large-format plank flooring, small-format wooden floors are referred to as parquet. These come in a huge variety of timber patterns and colors, and each variant can improve the beauty of your home significantly.

Types of Timber Floors

A variety of different wood elements in different widths, lengths and designs are available. Together they have the shock and joint-free continuous view of the individual element and which include:

  • Solid Planks: These are boards that are usually 21-50 mm thick and have enough width (from about 80 mm). At a thickness of less than 40 mm, these are referred to as board, and, with a larger thickness, as screed.
  • Two-layer or Multi-layered: These are large-sized wooden elements whose top layer consists of one sheet. These are also referred to as planks.

As a material, pine, larch, spruce or fir is usually used. Occasionally, planks are also made from the much more valuable deciduous or tropical woods. These are often found in old buildings around 1900 are the imported timbers Pitch pine and Oregon pine (Douglas fir).

History of Timber Floors:

Before the advent of sawmills, planks from the thickest logs were sawn by hand, with the plank sawed from the center of the trunk to prevent warping of the wood. So, very wide floorboards (up to one meter) were possible, the floorboard was thus very uneven. With the advent of industrial wood processing (from about 1850), the boards were thinner, uniformly wide and usually spiked. The length was such that it corresponded to the length of space across the beam position.

For very long rooms or corridors, a continuous butt joint was formed on a floor joist. The planks and many commercially available solid wood planks have a fixed clothing length of about two meters and are rounded on all sides, so that they also have a solid connection at the front sides. This allows adaptation to any room lengths.

Construction and Function:

In the floorboard of solid floorboards, the boards form the load-bearing slab and the surface of the floor at the same time. In traditional wooden beamed ceilings, the planks are nailed directly to the floor joists, and in the case of planked planks, they are usually skewed by the spring so that the nail is not visible. Optionally, a bar to compensate for bumps and the deflection of the beam to the middle of the room is interposed. Thus, the plank floor also has a statically stiffening function in the building by stabilizing the ceiling as a composite surface.

Due to this construction, the ceiling construction is inadequate acoustically. Timber floors on solid ceilings such as concrete require wood beams that can lie on the rough floor or are glued directly to the screed with elastic adhesives. The surface remained either untreated or was with ox blood or floor wax sealed. Later, the seal with clear coat was added, in recent times, the oil is an alternative. In the present, multi-layer planks, which are offered as spotted or also as lock systems, are glued floating or with adhesives on screed or blind floors. Such floor structures have no supporting or static function, but are a floor covering whose appearance is comparable to a plank floor.

It can be suggested that timber floors can improve your house’s interior d├ęcor and make it classier and more elegant.

Leave a Comment

Time limit is exhausted. Please reload CAPTCHA.

comm comm comm